WIT Press


On The Lay Selection With Determined Surface Frictional Properties

Price

Free (open access)

Paper DOI

10.2495/SURF030241

Volume

39

Pages

10

Published

2003

Size

395.40 kb

Author(s)

H. Latos & M. Dalak

Abstract

On the lay selection with determined surface frictional properties H. Latos & M. Dalak University of Technology & Agriculture, Bydgoszcz, Poland Abstract The paper deals with a geometrical model of the wear mechanism initiation according to the macroroughness tops radii R, the rnicroroughness peaks radii r, and their inclination angle h, in relation to the friction element movement direction. It was found that kinematic apparent self-sharpening some surface roughness tops occurs according to a physical phenomenon during the oblique cutting process. Experimentally carried out validation of the wear mechanism initiation was in good agreement with theoretical assumptions and analyses. The mechanism developed is explained in light of the geometrical structure of friction surfaces with the determined frictional properties, both in technology and nature. Analysis of the conditions affecting chip formation start-point initiation allow us to give guidelines to minirnise initiation friction surfaces geo

Keywords