WIT Press


Efficiency Of Surface Cold-work Hardening Of Titanium Alloys Having Different Phase Composition

Price

Free (open access)

Paper DOI

10.2495/SURF010021

Volume

33

Pages

10

Published

2001

Size

759 kb

Author(s)

E.N. Kablov, I.E. Kovalev, P.D. Zhemanyuk, V. V. Tkachenko, S.A. Voitenko, L.A. Pirogov, F.P. Banas & A.E. Kovalev

Abstract

Efficiency of surface cold-work hardening of titanium alloys having different phase composition E.N. Kablov\ I.E. Kovalev*, P.D. Zhemanyuk*, V.V. TkachenkoS.A. Voitenko*, L.A. Pirogov^, F.P.Banas^, & A.E. Kovalev* ' VIAM State Research Center, Moscow, Russia. ^ Motor Sich, PJSC, Zaporozhye, Ukraine. * K.E.Tsiolkovsky, Moscow State Aviation-Technology University, Moscow, Russia. Abstract The characteristic features of influence of preliminary plastic deformation degree (S ') on endurance limit (a_0 of titanium alloys having different phase composition are revealed. The connection between character of relation (a_i - S ') and efficiency of hardening of parts by methods of surface plastic deformation (SPD) is shown. On the basis of the analysis of investigations of a, pseudo-a, and a, + (3 titanium alloys a conclusion is confirmed experimentally that the absence of sharp decrease of endurance limit of a material in the field of minimum plastic deformations makes hardening of parts by me

Keywords